Aluminum Alloy Pneumatic Pinch Valves are the ideal solution for isolating and regulating abrasive, corrosive, and fibrous products. They are used more and more as an isolating valve or regulating valve for emulsions, sludges, dusts, gaseous materials, compressed air, powder, granulates, pellets, etc.
Product Description
The aluminum alloy air operated pinch valve from the VA series are designed for shut-off control applications with abrasive, corrosive, and fibrous media. The series includes pinch valves with female threaded ports, sizes ranging from 3/8 to 4 inches. The maximum operating pressure is at 6 bar (87 psi) and the maximum control pressure is 2 bar (29 psi) higher than the media pressure. These valves can be equipped with either natural rubber food-safe sleeve, natural rubber abrasion resistant sleeve, or EPDM sleeve. These valves ensure an optimal shut-off, even when used with solids, such as granules, powders, pellets, chipping, sand, cement, gravel, textile fibers, carbon, fine glass fragments, and slurries (liquids that contain solids).
● Completely free flow
● No clogging by media
● Minimum frictional resistance
● Quick opening and closing
● Low energy consumption
1.No-compliance with the operating manual including the safety instructions.
2.Operating the pinch valve for a purpose other than its intended use.
3.Unauthorised or untrained person operating the pinch valve.
4.Installing the non-original spare parts.
5.Violating the applicable standard.
The higher the quality of the air-operated pinch valve inner bushing, the longer the service life of the pinch valve and inner bushing. The long service life of the inner sleeve of the pinch valve means that the maintenance cost of the equipment is low. The replacement of the inner bushing of the ai Read More »
Pneumatic pinch valve, also known as pinch valve, squeeze valve, bladder valve, hose valve, airbag valve, pinch off valve, etc. The pinch valve rubber sleeve (inner bush) is an important part of the pinch valve and the core of the pinch valve. It provides corrosion resistance, wear-resistance, and p Read More »
1. ScopeThis standard specifies the classification, requirements, test methods, test rules, markings, packaging, transportation, and storage of pneumatic pinch valves. This standard applies to air-operated pinch valves with flange or internal thread connection. 2. Normative referencesThe following d Read More »